Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Axle/Differential
Model Year: 2008 Model: Sequoia Doc ID: RM0000017BL00NX
Title: AXLE AND DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY

(a) Install the differential support with the F and G bolts.

Torque: 100 N·m (1019 kgf·cm, 74 ft·lbf)

(b) Using a jack, slowly raise the front differential carrier assembly to its installation position.

(c) Temporarily install the A, B, C, D and E bolts.

(d) Tighten the A bolt.

Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)

(e) Tighten the B and C bolts.

Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)

(f) Tighten the D and E bolts.

Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)

(g) Connect the automatic disconnecting differential actuator hose.

(h) Connect the automatic disconnecting differential actuator connector.

2. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

(a) Install the front drive shaft DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY: INSTALLATION (2008 Sequoia) .

3. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.

4. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(a) Install the front propeller shaft DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: INSTALLATION (2008 Sequoia) .

5. ADD DIFFERENTIAL OIL AXLE AND DIFFERENTIAL: DIFFERENTIAL OIL: REPLACEMENT (2008 Sequoia)+

6. INSTALL NO. 1 ENGINE UNDER COVER 3UR-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+

7. INSTALL FRONT WHEEL

(a) Install the front wheels.

  • for Aluminum wheel

Torque: 131 N·m (1336 kgf·cm, 97 ft·lbf)

  • for Steel wheel

Torque: 209 N·m (2131 kgf·cm, 154 ft·lbf)

8. INSPECT AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR

(a) Inspect the automatic disconnecting differential actuator AXLE AND DIFFERENTIAL: AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR (for 4WD): INSTALLATION (2008 Sequoia)+ .